Qwakrz
loves it here
HDi - Looking for 180BHP
Posts: 79
|
Post by Qwakrz on May 16, 2005 12:09:15 GMT -5
Ok, this will probably goto the bottom of the list very quickly but...
Does anyone know the spec's for the intank pump on a HDi diesel (2.0). The information I have gathered state that it has the following
Max Pressure is 7.0 bar (98PSi) Fuel Flow is 140 liters per hour
This seems alot for a tank pump.
The main reson is that I am looking into running a twin tank setup for new / waste veg oil (cheap and readily available) and this is causing me some headaches because I need to match fuel flow & pressure.
|
|
|
Post by BigOL on May 16, 2005 12:27:22 GMT -5
Kevo going to be the man for that one as he should be able to see that info on the Pug computers. Lee might know with his Haynes but I dunno.
|
|
|
Post by LeeXS on May 17, 2005 4:04:07 GMT -5
|
|
Qwakrz
loves it here
HDi - Looking for 180BHP
Posts: 79
|
Post by Qwakrz on May 17, 2005 10:38:08 GMT -5
Yep, thats my thread..... (but you were not to know)
I have frequently been speaking to Mike, the HDi he did didn't have an in-tank pump (I thought they all did).
I have given him as much info about the fuel system as I have and he is trying to do his best.
I have also spoken to Nicholas at DieselVeg and they will not provide a kit, only fit it for me at over £1000 as they say its beyond a beginner to wire it all up. I prefer to do as much on my car as I can so I know what it all does.
The pump is the only thing causing me problems at present due to its ratings.
|
|
|
Post by LeeXS on May 17, 2005 10:44:08 GMT -5
I cant find nowt on it mate!!
Its strange!! Have you spoken to pug?
|
|
|
Post by BigOL on May 17, 2005 12:40:42 GMT -5
You tried the DervDoctor?? I don't know if they dabble in the veg-diesel bracket.
Must be somewhere on the net that does this sort of thing.
|
|