|
Post by JayDee on May 6, 2005 8:16:32 GMT -5
The Offside wiper arm on my 206LX travels below the setup marks on the downsweep and just touches the bonnet frame , the nearside one seems to finish up in the correct place. Is it possible to adjust the travel of the offside wiper so that it parks within the two marks on the windscreen ??
|
|
|
Post by LeeXS on May 6, 2005 8:46:18 GMT -5
If you lift you bonnet you will notice the mechanism for the wipe - it is likely this has come loose - check all the bolts on the mechanism and if one is loose then set the wiper to the place you want and tighten it up!! Can give you a more detailed reply laters if you wish!
|
|