gridnutter
likes it here
206 1.4GLX & 307SW SE
Posts: 12
|
Post by gridnutter on May 3, 2005 9:46:40 GMT -5
Now that my exhaust is sorted, I need to address an issue that has affected the car since I got it....
When reversing on full righ hand lock there is a rubbing sound... Investigation has revealed that there is a small rod that runs down parallel with the front strut (connects to the anti roll bar), and this is rubbing against the drive shaft. Any ideas how this can be rectified?
Regards
Craig
|
|
|
Post by Blackpug on May 3, 2005 17:24:36 GMT -5
This is your drop link. It shouldn't touch the drive shaft at all. Jack up car on this side. Remove wheel. Check droplink joints and anti roll bar bushes / caps for too much play. Does it not do same when driving forward at full lock? ps The droplink should be connected to strut and end of anti-roll bar.
|
|
gridnutter
likes it here
206 1.4GLX & 307SW SE
Posts: 12
|
Post by gridnutter on May 7, 2005 14:24:16 GMT -5
No, only does it in reverse....
|
|